Footwear: Insert nut

I had find many products about Nuts And Screw from some websites such as

	Welded Screw Welded screws are used on car engines.mor
	XPS Foam Board Extrusion Line(135/150.. Place of Origin: China Model Number: XPS-135/150 Brand Name: DEYILI Brief..

And you can see more from plasticpaperwire strip nails pipe support clamps hex machine bolt titanium alloy screws flute masonry nail salon art nail base m6 screw equipment other fasteners vickers hydraulic screw
An insert nut provides a threaded socket for a wooden workpiece, similar to a wall anchor. Insert nuts are inserted into a pre-drilled hole by one of two means: screw in and hammer in. In both cases, the external protrusions bite into the wood, preventing the nut from either turning or pulling out.
Insert nuts are advantageous over barrel nuts and T-nuts, because they can be installed from one side of the workpiece.
Contents
1 Screw-in type
2 Hammer-in type
3 References
3.1 Notes
3.2 Bibliography
//
Screw-in type
Screw-in insert nuts have an external thread and hex head and are screwed in with an Allen wrench. The screw-in insert nuts come in various sizes and take different screw sizes. For example, a "1/4-20" insert nut will take a 1/4-20 inch bolt. The pre-drilled hole must be as deep as the length of the insert nut plus any portion of the bolt that may be screwed past the end of the nut in the work piece.
Hammer-in type
Hammer-in insert nuts, also known as knock-in nuts,[citation needed] are lined with barbs and are hammered in. They are often made of steel, brass or nylon. They are designed to work in wood and particle board.[1]
References
Notes
^ Willacy, p. 39.
Bibliography
Willacy, David M. (1992), Craft and Design in Wood, Nelson Thornes, ISBN 0748710663, http://books.google.com/books?id=xzVoc53dytwC.
Categories: Fasteners | Woodworking stubs
Hidden categories: All articles with unsourced statements | Articles with unsourced statements since November 2008(and so on)